- What is NoPhos?
- Your benefits at a glance:
- Phosphate target levels & analyses
- How to use NoPhos?
- Ask a question
Unicellular algae and bacteria need phosphates to transport nutrients across their cell membranes. In the absence of phosphates they cannot metabolise any nutrients that are present in the water.
NoPhos removes phosphates that enter the system from make-up water supply, from animal feed and from wind blown debris. Phosphates are fertilisers and if controlled, algal and bacterial growth can be managed. If phosphates are removed they will starve and algae/bacteria are eliminated over a period of about six weeks.
NoPhos is a natural product that can be safely used in living systems. It is widely used in aquaria and mammal systems around the world including use for management of phosphates in living coral culture. Dryden Aqua’s knowledge as marine biologists ensures the purity and consistency of chemical content that determines its suitability for aquarium use.
NoPhos uses Lanthanum, a charged ion which reacts with phosphate to form an insoluble precipitate that is removed by AFM®, or it forms an inert deposit on the bottom of the pool that is easily removed.
Prevents algae and bacterial growth
Is a natural product
Can be used in marine mammal LSS as well as in fish and invertebrate systems. Non-toxic and guaranteed pure!
Is a coagulant
It improves the filtration performance of both AFM® and sand filters.
- In mammal LSS the objective should be total elimination of phosphates.
- In biological systems phosphate levels should be controlled to between 0.05 and 0.1mg/l.
Phosphates can be analysed using a simple spectrophotometer with appropriate reagents. Analyses will measure only phosphates in solution and not those bound up in organic matter. The actual level of phosphates will therefore always be greater than measured levels and continuous low level dosage will normally be needed.
Only a small amount of NoPhos is required to remove phosphates. 10 ml of NoPhos is enough to bind 1 g of phosphates. In a system with 100 m3 of water at 0.5 ppm = mg/l = g/m3 of phosphates, there are 50 g of phosphates in the pool. To remove 50 g of phosphates 500 ml of NoPhos is required.
In animal systems, NoPhos should be automatically and continuously added to the pool using a peristaltic dosing pump. 1 litre of NoPhos can be diluted to 20 litres using clean water. This solution is then continuously dosed into a ZPM before the filter at 1 ml per m3 of water circulated.
Example: 100 m3/hr circulation = 100 ml/hr of diluted NoPhos. Depending on the analyses, dosage rates can be adjusted up or down.
It is not possible to overdose in a non-biological system whereas overdosing in a biologically filtered LSS can starve the bacteria in the biofilter. Some phosphates should always be left in solution to help maintain the biofilter performance. Monitoring of the phosphate concentration is therefore important.
NoPhos reduces bacterial and algal growth but is neither a disinfectant nor an algicide.In external biologically filtered systems that are exposed to UV light, NoPhos should be used in conjunction with ACO® bio. This will raise the RedOx potential and improve water clarity. Both products will work even with poor or no filtration.
In natural lakes, reservoirs and ponds, dramatic improvements can be seen with ACO® bio, even without filtration.
Standard ACO® and NoPhos should always be used in all outdoor chlorinated systems.
For local customers
Please note that shipping fee is not added to the mentioned prices. We have strategic partners in different locations for fulfillment:
More places to come soon.
If you want to know about shipping charges, contact us @ +63-998-265-9514 or email us at firstname.lastname@example.org
For international customers
To arrange for mode of delivery, please send your purchase order confirmation to email@example.com or contact us thru viber/whatsapp @ +63-998-265-9514